Description
The Compute Module 3 contains the guts of a Raspberry Pi 3 (the BCM2837 processor and 1GB RAM) as well as an optional 4GB eMMC Flash device (which is the equivalent of the SD card in the Pi). The Pi 3 has a processor speed of 1.2GHz and runs at roughly 10 times the speed of the Pi 1 due to its quad-core CPU. This is all integrated on to a small 67.6mm x 31mm board which fits into a standard DDR2 SODIMM connector (the same type of connector as used for laptop memory). The Flash memory is connected directly to the processor on the board, but the remaining processor interfaces are available to the user via the connector pins. You get the full flexibility of the BCM2837 SoC (which means that many more GPIOs and interfaces are available as compared to the Raspberry Pi), and designing the Module into a custom system should be relatively straightforward as we’ve put all the tricky bits onto the Module itself.
Additional information
| RAM Size | 1gb |
|---|---|
| SSD Capacity | 32 GB |
| Most Suitable For | Industrial |
| Processor Speed | 1.20 GHz |
| Brand | Raspberry Pi |
| Series | Raspberry Pi 3 |
| Form Factor | Single Board Computer |
| Type | All-in-One |
| Unit Type | Unit |
| Maximum RAM Capacity | 32 GB |
| Model | Raspberry Pi Compute Moduel 4S |
| Hard Drive Capacity | 32 GB |
| Operating System | Not Included |
| Storage Type | eMMC |
Reviews
There are no reviews yet.